IJOY Vape Captain Kit Mercury coils review

IJOY Captain Kit come in various colors.

 

– Mirror rainbow

– Mirror black

– Mirror Green

– Mirror Gold

– Mirror Purple

– Mirror gunmetal

– Mirror Art

– Mirror black

– Mirror Red

– morror blue

– Mirror Orange

 

Specification:

 

Baby avenger IJOY MOD

 

– Size: 66 x 48 x 34 mm

– Maximum power: 108W

– Output Mode: VW / VT (Ni / Ti / SS) / TCR Fashion

– Resistance Range: 0:05 – 3.0ohm

– Voice control system: English

– Battery Type: 2 x 20350 battery (included)

– Double Capacity Battery: 2800mAh

– Topic: About 510

 

diamond baby tank IJOY

 

– Size: 52.7 x 22.5 mm

– Capacity: 2 ml (TPD Version) / 4 ml (standard)

– coil: coil DMB-mesh 0.18ohm (40-80W preinstalled)

0.15ohm coil DMB-DM (40-80W)

– 510 resin advanced drip Drip Tip

– Subject: 510

 

 

features:

 

– Dual 20,350 with a battery power 108W Max

– The smallest voice control TC 108W MOD in the market for e-cig

– System innovative voice control

– RBG LED lighting button Adjustable

– large color display OLED 1.3 inch

– The only way custom user

– Firmware update

– No false by tank 30 mm

– 180 ° Fast charge with screw cap 2 ml / 4 ml capacity E-juice

– The new DMB-Mesh DMB coil and coil-DM adamantine

– The adjustable air flow down

 

In the frame:

 

– IJOY Avenger MOD Baby Safety

– 2 x 20350 battery

– 4 ml Baby Diamond Tank

– DMB-Mesh 0.18ohm coil (40-80W pre-installed)

– coil DMB-DM 0.15ohm (40-80W)

– Change in the glass tube (2 ml)

– USB Cable

– Free

– Warranty card

 

IJOY JUPITER is available in several different colors. I received this black tank, tank baby diamond diameter is 22.5 mm, the height is 52.7mm. The build quality is good, no quality problems. We could see the sculpture atoizer, at the bottom, you can see engraved “Designed by IJOY” and “Diamonds baby tank” on the upper deck, you can see engraved “IJOY” and diamond engravings. Below the foregoing limit, you can see some details and details of the same diamond ring control airflow.

 

 

Diamond baby is beautiful tank with a drop point resin drop 510 is very pretty at the top of the tank in my opinion. You can also use your own advice 510 drops here without any problems. Drip Tip almost comfortable to use. The diameter of the drip tip is 13 mm, the tip diameter of the droplets is 8 mm.

 

This is a superior spray filling and you can remove the top cover is very easy, you only need half a turn and that is, you can fill the tank without problems, two details engraved on the top cover helps a lot when you want to open the top cover. A hat letting go, you can see a huge hole for liquid mail, so probably will not be a problem, even with a large bottle. In my opinion very nice filling more.

 

Baby diamond comes with bubble glass tank, this tank has a capacity of 4 ml, which is very good for a small atomiser. color glass bubble tanks, maybe can view photos. Using spray will receive ordinary glass tank in the package, ordinary tank capacity is 2 ml glass. I use a glass bubble because I like how it looks and I like the ability.

 

With the tank diamond will receive two different rolls, it comes preinstalled with DMB – M5 coil, the backup of the coil is to receive DMB – DM. The second coil is a coil, mesh force recommended for DMB – M5 is 40-80 watts coil, the coil resistance is 0.18ohm, the concentration recommended DMB – DM coil is 40-80 watts and resistance coil .15 ohm.

As always, before meeting the needs privileged tank coil with few drops of liquid E can then fill the tank and vaporizer immediately and a snap be avoided.

You can also use a little more rolls:

 

DMB – coil C1, the coil resistance of 0.3ohm, force is suggested 35-70W

DMB – coil C2, the coil resistance of 0.2ohm, force is suggested 40-80w

DMB – MS coil, the coil resistance of 0.18ohm, force is suggested 40-80w

 

More in the field where you need to press the battery is good and you can change the coil without any problems. The bottom of the tank, you can see 510-pin gold plated wire is also good here.

Basically, you can see the control ring in the ring airflow and the airflow can see two ventilation holes. ring airflow is perfectly tensioned and can adjust the air flow evenly, which sit on one side, which is the same on the other side.

 

How does this work tank:

 

It is very simple sub-ohm tank, which I like. It is very easy to use, easy to fill the tank is easy to change the coil atomizing or removed for cleaning. I like the tip drops, looks great in my opinion. good build quality, no sharp or bad engine. The IJOY Diamond coils

have worked well without rap, no leakage, eg using 70-30 pg and liquid. fairly good flavor to a tank sub-ohms, steam production is good also.

I have no problem with the coil, both M5 and dm work very well, but I like the coil more comfortable M5. DM coil is longer, but tastes better when the coil is used M5, at the least that’s my opinion, you may want to last DM coil. Anyway, this is also built under the deposit ohms and working properly, so I can not pick anything wrong.

 

IJOY Shogun Kit

 

Avenger is a new mod mod baby with IJOY has voice control. It has more control than the previous fiscal and the latter is smaller. This mod Size: 48 mm x 34 mm x 66 mm. the maximum power that can be used in this mod 108 watts. coil resistance employable here is 0.05omh-3ohm. The build quality is good and you can feel the quality when held in hand, I can say that the model is quite a lot of weight. Avenger baby is fed by a battery 20 350 double. Can be used in several different ways, it can be used in power mode, fashion tc (art or, you, m1, m2), the sheath and TCR mode. I have to say really IJOY always offer the batteries in your mods, very good with this device, receive two 20350 batteries and do not need to buy the battery separately, you can use the device immediately. IJOY 20350 battery has a capacity of 1400mAh, so basically you have a capacity of 2800mAh mod, but also the battery, you can see, he said the maximum current is 25A amps.

 

From the top you can see the stainless steel mod connection is screwed up, which is good, good son, gold-plated pins 510 and spring. In this unit, use atomizers with a diameter up to 30 mm without false.

The Ministry of Defense can see some details on the back of the unit, there are “baby Avenger” on the front of the device, is “IJOY” at the bottom of the mod, you can see the “Designed by IJOY “. From the bottom of the chamber, one can see the battery cover and there are 8 vents. The doors have played a little when you when you have a battery opens the door, but inside the mod no noise when the device is shaken, the battery is still done very nice place when batteries and can not be open to chance . When the battery cover is opened, you can see the orientation of the battery recorded, but recorded in black, it can be a bit stupid, must be marked in white color.

shutter button on the device is placed in the MoD and the large side button fire is dislocation and works very well. shutter button placed in my opinion, in a very good position and can be used primarily with fingers or hands, you can not miss when the mod is taken and want to delete.

From the front of the device can see the screen and below buttons and a USB port for charging and updates.

avenger support load balancing IJOY baby so you can load here, but as usual, I recommend using an external charger. Button at the front too dislocation and sensitive. While LED light touch and if the light is on, the zone of plus and minus button lights.

This device has a color screen, the screen size is 1.3 inches, the screen is very good in my opinion, on the screen, you can see a combination of red and white and you can not change color in screen.

 

To activate it you must click 5 times on the fire button and turn it off, you must click 5 times the shutter button. When the screen is turned on, you will see a version of the firmware, but when feeding mode on the screen, see:

 

– Power

– against blow

– Preheat

– coil resistance

– Volt

– dual battery indicator

 

To enter the menu you must click 3 times on the shutter button, take him see the menu:

 

– Supply Mode

– Pod Fashion

– LED

– Temperature control

– RCT

– Together

 

To move, you will use more and less button and enter the submenu, use the shutter button. In the power mode, heat can be adjusted before and can be chosen to fresh, normal and hard preheating. If you choose regular pre heat still provide warmth before and will go to the point of power. It could be a disadvantage for some people, so quickly, but the fire, which could be a disadvantage for someone who wants to use it without her.

If you select a pod, which is here to adjust the power output in volts, which is a very good choice and I like, can adjsut between 2.5V-3.8V that.

If you choose the LED on the menu, you can choose the color of the LED lights and you can choose between the mode of red, green, blue, white, colorful voice. The sound mode is an interesting choice of light. So if you want your LED lights mod, you can play with and choose what seems best for you, if you do not like, you can always disable the selection of LED lights.

 

Then comes the TC mode, here is an IN, IT, SS, M1, M2. Next TCR menu and is the preferred game. Then you can restore breath against this device blows remembered even when the battery is removed, but a counter is reset when puff puffs 9999 is pressed. You can also set a screen, so you have several options, 30, 60, 90, 120 s. Finally, you can do here is to enable or disable the voice command. Given that the voice command is the main feature of this mod, I will write comands voice here. Anyway, the voice control function can be very interesting for someone. So when you want to use the voice command to say “Hello IJOY” and you will see a microphone at the bottom of the screen. Here we have a sound control in the previous protest.

 

Voice commands:

 

– Hello IJOY

– Soft Mode

– Normal mode

– Hard Mode

– Locking device

– Enabling device

– High voltage

– Twenty watts

– Thirty watts

– Forty Watt

– Fifty watts

– The sixty watts

– Seventy watt

– Eighty watts

– Eighty watts

– Low battery

– Auto watts

– Turn on the light

– Light music

– light

 

 

 

I not used this option, but it may interest you. I tried cource and works well, but if this option is used, must be in a quiet environment, otherwise do not understand.

It can also lock the device by simultaneously pressing more and less buttons, similar to the release.

 

 

 

How mod baby avenger:

 

Let me start with the battery, the new battery, I can not find much information about the battery, battery, said 25A and 1400mAh. Because I want to IJOY Mercury Vape, I tested the battery with the 1.15ohm coil 12w, average 2.5-3s blow. This means about 460 flashes to indicate when mod indicates that the battery is empty.

the build quality of the model is good, works well and I use it every day without any problem, all you can interrupt a normal person hot pre cousin if a shot is set regularly before your new give a warm and I hope fixing him with updates,

better voice control, which is great if you want to control the use of sound, can be useful for you. lights here, have also led, one would like LED lights, not a person, but can be disabled if they do not like.

It is a very short mod and I felt very comfortable in the hand, in the opinion of my shutter button in the perfect position and I love it.

I love how the appearance of the machine basically works well, the control works great voice and I recommend this mod for people who want to try a voice command for you.

 

 

You can buy it here: IJOY.

Smok tanks Nord pods RPM Pro mag grip trinity alpha nfix review

I received a kit Morph smok nord2 pods the purposes of this review.

 

Smok morphing colors:

 

– Gold black

– 7 colors and black

– Black red

– Blue and Black Prisma

– black and chrome prism

 

Description and features:

 

– Morph Mod 219 Size – 44.8mm x 30.2mm x 84.5mm

– Battery Type: 18650 dual battery (not included)

– Power range: 1 W-219W

– Display: touch screen 1.9 ”

– Input voltage: 6.4V-8.4V

– Output voltage: 0.5V-8.2V

– Cooking time: 0.001s

– Charging Current: 1.8A

– Charging voltage: 5V

– Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)

– Temperature: 200-600 ℉ / ℃ 100-315

Tank size TF -: 25.5 mm x 56 mm

– Capacity of tank: 6 ml

– Discussion: 510 Discussion

 

In the frame:

 

– Morph SMOK RPM 80 Pro

– 6 ml Smok tank TF

– Smok TF BF-Mesh 0.25ohm tank coil (pre-installed)

– 0.25ohm Smok TF BF-Mesh tank coil

– silicone protective glass bulb

– glass tubes Replacedment

– USB Cable

– User’s Guide

– Bedrooms

 

Smok tank tf:

 

Tf is 56 ohm smok mag grip mm high and is 25.5mm in diameter. In the package with the atomizer you will receive a glass tank and tank ordinary glass bubbles are very good, also receive a protective silicone in the glass tank and two coils. atomizer quality construction is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the atomizer “Designed by Smok”, you can buy 5 different colors.

 

Atomizer comes with a drip edge 510 pre-installed, so that the atomizer can be used another drop tip 510 if it does so. Drop by drop point that is pre installed is very nice and I think it is convenient to use. I think it’s very nice that finally made the atomizer 510 is supported, but for some people it would be preferable that the atomizer is compatible with 810 drip tips, however, advanced drip packaging is very comfortable and good looking.

 

This is a high filling syringe. Previous you can see atomizer keys to press for putting up. When the top cover is pressed, you can see the contents of the hole. Fill a large hole and the atomizer can be filled without any problem, so basically, filling here is very simple and can fill the atomizer very fast. More filling works well and should not leak when the atomizer system is filled.

Atomizer glass comes with bubble tank and pre-installed in the box will receive regular glass tank. atomizer tank with ordinary glass capacity is the capacity of the tank glass bubble 2 ml and 6 ml capacity is very good and I think many people as the capacity of the reservoir. With the atomizer, you receive a protective silicone for glass tank to protect the tank in case you drop, very good in my opinion.

 

Using spray, you receive two rollers and two coils are the same. Coil is bf mesh coil and coil resistance 0.25ohm, is recommended for the coil power is 30-80w 60-70w and better job. Can really easily change the atomizer coil, all you have to do is push the coil atomizer, very easy and simple. When a coil is used first, it must be primed with a few drops and can be put into the atomizer and filled syringes.

 

Basically, you can see the control ring airflow and the ring can be seen two slots airflow. Ring control air flow, we have some details that helps when you want to adjust the air flow, so you can less easily adjust more or airflow and allows you to set aside will be the same side Oher.

 

How does it work? Atomizer and my mind:

 

the build quality of the atomizer is very good, everything is as it should be. It comes with 510 preinstalled advanced drip which is very good because you can use the other end of the atomizer 510 drip. Drop to drop that comes pre-installed my opinion comfortable to use. It would be preferable atomzier 810 is compatible with the advice drip, so this could be a disadvantage for some people. The system is very easy to complete and can fill the tank very fast, so far, works well. The capacity of the container is 2 ml glass standard, but with a glass tank capacity bubble really good ability 6 ml. In the package, we received silicone protector for your tank that was really good. Really can easily replace the spool into the atomizer and the atomizer, you’ll receive two coils. Atomzier works very well, taste and also a good steam, this is not the best mesh coils there, but certainly better taste than many I’ve tried sprays. Therefore, the tank is very tf solid deposit in ohms, worked well and it was quite easy to use.

 

 

Drawbacks:

 

– Not compatible with 810 drip tips

 

 

 

Pro:

 

– The build quality is good

– easy to fill

– Compatible with 510 drip points

– comfortable drop points fall preinstalled

– 6 ml capacity tank bubbles

– Protective silicone

– The good taste

– Two coils in the package

– Easy to replace the coil

 

 

 

 

 

 

modification:

 

smok trinity alpha tank is powered by two batteries 18650 and this model works 1-219w. You can buy this model in 5 different colors.

This dimensions 44.8mm x 30.2mm model are x 84.5mm. mod good build quality, everything is as it should be. This mod design is very good in my opinion, have received this blue mod and can say that a beautiful painting. This device is very convenient to use, no sharp edges and large shutter button, because it is a very nice feel in the hand. Faced with this mod you can see “Smok” and behind the mod, you can see the “Morph”. This model has a touch screen that I really like and also supports multiple operating modes mod that can be used.

From the top you can see the mod connection and here we have a spring loaded pin gold plated. Put here is good and I have no problem with atomizers I have discussed here. A good connection, which rises slightly, which is good because you do not scratch the Ministry of Defense with atomizers. In this mod, you can use aerosols up to 26 mm in diameter, which is more than was good for me.

 

Sub mod you can see the battery cover. I really like the locking mechanism of the battery cover. When the battery cover is opened, you can see how mod mod paintings batteries and is powered by two batteries 18650. So far I have not had a problem with the battery cover. When the batteries are in the mod and mod stir when there was good rattle.

 

 

On one side of the mod, you can see the shutter button. The shutter button is huge and I really like the shutter button. shutter button is very convenient to use, is dislocation and works very well. At the top you can see the shutter button and a button using this button, you can lock the screen or off screen. When the button is held locks the screen and clicking the button you can turn off the screen.

 

 

On the front of the mod, you can see the screen and USB port.

You can use the USB port for software updates or to charge the battery of this device means load balanced, but as always, I recommend charge your batteries in an external charger.

In this device, we have a color screen is very nice, big screen, the size of the screen is a 1.9inch screen and in my opinion, this device looks very beautiful and really is a touch screen.

 

To activate it you must click 5 times the shutter button and should do the same to turn it off. When the device is turned on display the power mode, you will see:

 

– I can not

– locking / unlocking

– Time puff

– W

– Preheat

– Left and right

– Resistance

– V

– against blow

– A

– The battery indicator

 

The touch screen works well and so far I have not had a problem with the screen. Also on the screen, you can see everything nice and screen brightness are very good.

In the enter the menu, you can see:

 

– Modus

– My style

– hojaldre

– Setting

 

When the mode is selected, you can choose different modes:

 

– Watt

– temperature Ti

– Temperature Ni

– Temperature Ss

 

If you choose me mode, you can set 4 different operating modes, and you can adjust your diet, you can pre-heat and add the name of liquid and NIC.

If you choose Puff Puff, you can reset the counter.

When the setting is entered you can see:

– General (approximately factory reset, accessibility, food)

– Chip (Info)

– topics

– Access code

 

 

If you choose a theme, you can choose a different background and you can choose different colors on the screen and can also set the screen timeout. If you select the access code, you can set your own password, the device asks every time the battery is placed on the mod.

 

 

How do these devices work and my thoughts:

 

smok nfix pods is very good in my opinion, and certainly one of the best mods out there, I particularly like blue. mod good quality construction and complained about this mod. Chateo also looks good, but I must say that this magnet Finger prints mod will be a disadvantage for someone. In the device can be used to a diameter of 26 mm without good atomziers projection. You really can be easy to put the battery in the Ministry of Defense and so far DIND’T have a problem with the battery cover. There was nothing rattle when the batteries are shaken and when morning. shutter button is great and I really like the type of shutter button. It works well and is dislocation. It is also good that we have a key to lock / unlock the screen and enable / disable screen. This model also supports load balancing, but as always recommend charging your batteries in an external charger. Really beautiful screen and on the screen, we have all the information we need, big screen, the screen brightness is good and works well. I also like that we can change the color of the screen. This device has many options yet very easy to use. Mod works very well if you ask me, I tried with my MTL and atomizers DTL me and runs smoothly and probably will continue to use the device every day. If you are considering buying this mod and mod design you want, I can tell you for all that this camera can be obtained safely.

 

 

 

Drawbacks:

 

– fingerprint magnet

 

 

 

Pro:

 

– Good build quality

– Good design

– Paint Good

– can be used up to 26 mm diameter without false atomizers

– Connecting up slightly

– comfortable to use

– cozy fire button

– Screen Buttons

– beautiful and big screen

– good screen brightness

– Much of the information on the screen

– Easy to use

– The screen works well

– Theme Options

– balanced load

– Door battery works well

– My selection method

– Password Option

– No ring

 

 

sourcemore thanks

You can buy the kit here: Smok equip Morph

You can buy tanks: smok tanks

 

This is e-cigarettes under the smok brand review

Smok nord 2 come in several different colors:

– black Amarillo
– Red Black
– Silver black
– Red Gold
– red
– 7 colors

In the package:

– Poison MOD
– Deposit TFV8 Big Baby Light Edition (5 mL)
– Basic Baby-Q2 V8 (double coil 0.4ohm) (pre-installed)
– Basic Baby-T8 V8 (0.15ohm eight rolls)
– replacement of the glass tube
– 6 pairs of colors O-ring
– USB Cable
– User’s Guide
– Bedroom
– Guarantee card
– Warning Map

RPM80 Pro

Smok mag was very nice and definitely a great device designed with editing tfv8 baby looks good atomizer. a very attractive design with many details, especially in these very different brands of model aircraft. The most interesting is that the mod atomize and you could see a lot of LED lights. It is even possible to change the color of the lights, but we’ll talk.

In the picture, a lot is obtained, you receive a mod edition light baby poison tfv8, two coils and all you need, but also in the package you receive or rings that can be used to change the color of the lights LEDs on the atomizer and two beauty rings, again, very beautiful set.

I received this SMOK Nfix Kit 25W in 7 colors, this is subjective, but I like the way it looks, of course, you can buy this product in different color options.

Do shaped device is very nice and I like the way it feels in your hand.
At the top of the camera, you can see the gold plated spring pin 510. In the device, you can see many beautiful details and many LED lights, you can see two ASLO details engraved on one side you can see engraved “Smok” On the other side, you can see engraved “poison.”

This device has a button shaped lateral calls are very nice and want to use the device with the power button is placed on the side. the trigger is also very important, but can be activated if the upper half of it is pressed. Anyway, it is very comfortable and the shutter button can be touched with the fingers or palm, it all depends on how the shutter button is pressed. the shutter button is working. Below the screen you can see the plus and minus buttons, very clicky button.

In this device, you can see the USB port, you can use this USB port to charge the battery or upgrade the software. Smok balance for charging, so you can charge your batteries, but as usual, I suggest you use an external charger.

From the bottom of the camera, you can see the top of the battery, which lasts not open the door, I love the fact that the battery cover, you can see very clearly how you need to put the battery. The battery cover is a nice place when safely inside, the door can not accidentally open the batteries. You can not hear the sound when the device is shaken.

poison Smok has a color screen is very big and beautiful, the screen size is 1 inch. The screen brightness is good and you can see everything very nice.

To activate the device, you must press the shutter button 5 times. After that, you will see “Smok” on the screen and you will see a version of the software.

When the camera is on, appears on the screen:

– Indicator dual battery
– power (W)
– voltage
– Coil Resistance
– hot
– against the coup
– Time hojaldre

Thus, on the screen, you will see a lot of information, and if you ask me, is all you need, I have to say I like the battery indicator on the screen.

When the shutter button is pressed 3 times the device will be on the menu and the menu can be seen:

– setting mode
– Puff the establishment
– Screen Settings
– LED
– Switch off

To navigate the menu using the shutter button and the plus and minus buttons. If you want to enter the fire button in the menu-pressed lot.

You can use the setting mode to choose the work mode:

– Power mod
– Ni Tc
– Te Ti
– TC SS
– Memory Games

Smok trinity alpha

the build quality is very good, everything is as it should be. color quality is also very good, Smok improved and so far I do not see a scratch on the mod or spray and use it every day at home and away from me, for now all okay.

 

LIGHT baby blowers edition Tfv8

 

the diameter of the atomizer is 24.5 mm, a height of 56 mm and a weight of 60 g. Atomized is steel fly.

Atomizer is tfv8 baby is great, but a little different, this one is lighter and has brought the matter to light, so that when the spray shine spray. In the atomizer, led by a white light, but if you want to change the color of light that can be used or call the package and change. For example, if the O-ring is replaced with blue, when a brilliant blue spray. Build quality is very good, very good thread, and can not say anything about the poor quality of construction.

In addition to the atomizer there is extreme oscillation with two O-rings therein. Council drips very good start. real high point DRIP, the magnitude of the falling edge: The height is 19 mm and 15 mm, I think it is convenient to use.
Under the advanced drop drop, you can see the hat is a filling the top of the atomizer. This high filling capacity is very popular and very easy to use. All you need to do is push the envelope and see a hole where the tank is full, you can fill very quickly, I love it.
On the top cover, it can be recorded “Smok” and can display the details registered by unscrewing using cap to change the coil or for the spray cleaning.

Ignite and a very good clean base. From the bottom of the base, you can see engraved “Designed by Smok”.
Basically, you can see the air flow control ring on the ring and you can also see the same detail as using the upper deck and the details when you want to customize the air flow. ring good air flow, can adjust the air flow is very precise, and can not move randomly. stop the tone and flow existing air can not run forever, I want to see the top of the atomizer. Sheaves have two holes on each side of the air current and adjusted by a hand, which is the same on the other side. Streams soft and hard look.

5 ml capacity of the tank, but the rules of the European Union, you can buy 2 ml reservoir. It can be purchased separately a glass bubble to the atomizer and the capacity is 7 ml glass. I like that it is possible to extend the capacity of the atomizer. No glass bubble in the package, but you’ll have a glass a backup in case you break one. Or both rings also have a reservoir.

Generally, you will also receive two coils. A coil is baby Q2 core v8, the coil resistance is 0.4ohm and this coil is installed, power is recommended for this 40-80w coil, but it would be better to use between 55-65w. Another V8 coil core package receives the baby-T8 and coil resistance is 0.15ohm strength 50-110w recommended to the coil, but it would be better to use between 60-80w.
I always like to say, before filling the tank and spray, you must first start the coil with a few drops of liquid, and then fill the tank and is ready to spray drying without success.

Baby Edition Tvf8 large projection light work very well, either with my evacuation of liquid mail (vg-pg 70-30), so there is no leakage in fact no problem with this atomizer at all. steam production is very good with this tank, you can definitely enjoy if you want to chase the clouds. The taste is so good, you can not say anything bad taste.

This mod is a double mod 18650 and you can see the LED lights are beautiful and you can change the color of light.

 

Specification:

 

power range: 1-225w

Size: 86 mm x 47 mm x 30 mm

Weight: 180 g

Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)

Temperature range: 200F-600F / 100C-315C

Now, for example, if you want to change settings in the power mode, you must click 3 times on the shutter button and select the watt and hold the button for the shutter, you can adjust the power and brightness, of course, You can adjust the power on the main screen with the plus and minus buttons.
From the menu, you can also reset the blow against, or you can set the limits of the meter.
You can change the time display color and display. These devices have 6 colors available, you can choose from blue, pink, orange, red, white or green.
Then you can change the color of the LED lights and can also change the style of light. You can choose from 12 colors are available in the picture you can see the colors.
As I said, you can change the style of light and you can choose between normal mode, the flash and faded style.
You can also choose when LED lights are bright, can be illuminated when vaping, when the screen is on, or you can set to shine all the time. Of course, you can turn off the lights.
To switch off, you must go to the menu and you must find the option that is another little practice.

When the device is activated by 5 Click the button and the shutter locks when locked, you can not use the device.
Each time you change the atomizer, wonders if the coil and see new or old coil resistance before and a new coil.

Smok poison worked well within the chip is very nice and it was pretty accurate, I can not say a bad thing, as good quality. The screen is bright and big and I love it. Honestly, I want to use this mod with LED lights off, but I think people will love the features, good looks and interesting, sometimes I turn on the light and I admit, it looks amazing. I also like the fact that you can turn off the LED light, so if you like the features you will use if you do not, you can always turn it off, but you can not turn off the LED lights inside the atomizer. If the LED lights up as surely love this mod.
Another advantage is that the balance in favor of charging models. In this device, you can manage all the mod has so many good features, even more than necessary, which is a great advantage. This device is well suited for dual battery model and really the next shot.

As we all know, is Smok a company that now manufactures high quality equipment and is atomised not disappoint and this mod chip is very good, in my opinion, this is a very good tool.

You can buy it here: smok vape

Smoant Pasito Vape, Charon Baby and Replacement review

In summary and evaluation

Propel is a very good entry into the Smoant Pasito Vape Pod System And the best thing I’ve tasted to date, Replacement RBA Coil Head it even better. A reference that will take some beating – A must buy.

(Read on if you want to know why).

Ranking 9/10 – game changer
The highest value that can give because I do not believe in the 10/10. Perfection is subjective.

POD / AIO / MOD ??? – opaque line
I would put this in the category of AIO, but can technically be classified tanks and drums MOD changes. In line with the evolution of blur pods, which leads to a device such as Propel – Catfart calls for all I care! It is a compact spray device and I like the way the market is growing.

Main feature
Propel rich in features for such a small device, here are some of them:

content and the contents of the box
From the start, you know you have something special; box is one of the best packages I’ve seen served with magnetic flap folds open to reveal a double, which in turn reveals Propel. Therefore, no information printed on flaps and a case with a USB-cable C is accepted, the additional coil and some cards do not bother to read (but not).

Very impressive at all, although it would be better if you include the RBA.

contents
1 x mod Propel
1 x cartridge Propel
1 x Ni-coil 80 MTL 1.4Ω
1 x DTL mesh coil 0.6Ω
Cable Type 1 x load C
Warning 1 x Coil
Card 1 x Certificate
Warranty Card x 1
1 x User
First impressioStyle met with a mixed reception, which I personally like. Smoant the following claims:

“RCP INNOVATIVE TECHNOLOGY
CPR is used as a material design that produces a more beautiful color finish and lasting. No fingerprints. ”

grandma hand, I do not know CPR?

CPR?
colorful printed resin?
The reaction of cow urine?

My best guess is the second choice, but who knows? Additionally, Smoant Pasito II Pod Kit reacted and released a stylish addition to the carbon fiber should meet the enemy. Have time to be admired mod, I put it on charge faster and C friendly with USB cable. Then I begin the coil to the nacelle. He pulled out of the base, then simply unscrew the coil connector, very easy. Then I primed coil with a few drops of my favorite Nic juice Salt and screwed back and pushed together.

To fill pods, open end and an open drop to pay your eJuice without airbags. Although it was dark plastic, it is easy to see the level of juice. When finished, replace the tip of the dropper and let soak 15 minutes and ready to spray.

The Propel does not ignore one of the most desirable features of an AIO, and the air flow adjusted. the cursor a little uncomfortable at the top of the gondola is. MTL layer (Boca lung) and DTL (Direct lung). Although a little checklist to adjust, is a welcome feature and benefits for me. Not the size of the smallest, but still a good compact and easy pocket:

Features, comment and operating coil
On the one hand, the shutter button USB-C power control and ports. Interestingly Shoot buttons are willing to die, which is not unusual at the beginning, but quickly got used to me. I find it easy to fire sometime waiting with fingers or thumb, the place has never highlighted “pockets of fire” and has a high resistance. 5 Power button settings to adjust the level of hard soft power, lower power levels suited me, but is heated to improve vaporiser:

10 watts improvement – 13-16 – 20-25 watts.

Basically there are a lot of ventilation holes on the opposite side to empty the shutter button, the rear panel is simply a function without CPR. CPR before two separate panels, one above the LEDs 5 serving for various functions:

power level – click the button located in the desired improvements and see all the points of light accordingly.
Battery status – press the shutter button flashes five lights with a full load and reduce the number of points are displayed as the battery level is reduced.
battery levels – each point reflects the charge level: 20% – 40% – 60% – 80% – 100%
A press the shutter button five times to put the unit on standby and 5 clicks for return.

That’s all there is to do, very intuitive and easy to use. As mentioned above, the car has a magnetic connection and loosens easily but still adhere. probably unleash hell of it and will remain in place.

“Pod” has a cartridge falls sliding property to the tip, which can be replaced by another suggestion Propel. boring is a commitment to meet the needs of MTL and DTL and to be honest, it was very good for both. There is a small plastic slider to control air flow, wide to attract a tight DTL, MTL almost closed offer a very good drainage.

Battery life is very good and much better than expected with a battery of 1100 mAh, and the cost is also very fast, even at the price of 1 ampere it. Which should last a day on moderate use.

spindle
MTL: 1.4ohm coil Ni-80,
DTL: 0.6ohm DTL mesh coil,

Replacement MTL-Ni80 Coil Head.

I was very impressed with everything about this kit, I had high expectations for the coil. Fortunately, they met and then some. The taste is sublime with longevity. 1.4 Ohm MTL salt vape perfect nic socket and gives a surface very smooth, no precipitation or SpitBack. Force Level 1 is the group of coils offers a warm atmosphere and quick with his Ni80 material vape. 0.6 Ohm shot DTL nets like an ass in the right direction. I am surprised how much this as DTL VAPE this low power, a rich flavor and even at the highest levels of power took 1 to level 3, which is very hot and give a lot of clouds if you are in it. At first, I tried the juice but try 70/30 50/50 and handle well.

Compared to

I will not bore you with the details, all you need to know.

The only area Propel Insurance is very high, but we are talking about is already low, and no matter the device. Trinidad Smok Alfa closer to the characteristics and flavor, but a big disappointment for neglecting to incorporate adjustable airflow as it was very spacious (the next review). Another mention only decent thing was Artery Pal II, which is very close in taste and flow feature adjustable air with new HP coils. In second place nearby, but the adjustable power function. Now it has launched Pal II Pro sleeve, but he is a great professional who hit all the water, we will see later.

While AIO (all in one), mostly covered, but came the cherry on the icing!

Charon Baby Pod System Starter Kit

This is a game changer and make a beautiful and amazing AIO!

consisting of:

platform RBA
HOME
510 adapter (so you can try to burn or dry ohm coils mod model)
wire 2 x
Cotton
Screwdriver
Sealing Parts
I had to wait several weeks for the RBA me because I ordered from China, so I’m happy to use the coil. I do not think that to beat the roll media, but this option is much cheaper. After building the first, I was surprised how easy it is to build a small bridge. A use of the thread spool included (Ni80 I), which is a little rough hand injury to the 2.5mm diameter rod.

This may seem tedious, but it’s pretty easy to get to the coil. Waiting on the deck and the prefolding legs to match the holes in the two positions. With the lower coil legs, the first entry is easy, but the second requires a little more attention, it is sufficient to use a small pair of forceps and needle tip of the insert around. slightly lower pin screw, not too tight, you have to shoot his leg with a clamp, and once it is satisfied with the position which can tighten the screws (optionally with a 2.5 mm rod coil). This can damage the bit if the pinching rod coil and pull up to remove the air stream and the posts, then dried and pressed shaped recording tweezers to remove any ceramic access point. Check Ohm stability and no shorts (mine is 1.4 ohm), you’re ready for the axle.

Cut strips of the axis of about 6 mm wide and remove the thin skin on both sides (not removing too much), the rollers are loose, then one end of the wire through the coil you. I find the web through with some tension at both ends It helps maintain the shape of the coil. He must make do with little resistance. If it is too tight, it will test more coils means that there is too much cotton. Cut to length, should reach just below the base, then thinned a little trick. Then the spindle and axis juice (about 8 watts pulse is added when the juice) and feet when wet, must be in Meta comfortable in a circular groove. Finally, screw the chimney manufacturing care brand not to slip on cotton yarn.

All that remains to do is to remove the base 510 and the screw on the bottom of your reel Propel does the job!

Like many people, but it took a few minutes total.

If you are still unsure then YouTube is your friend, find “Pasito Smoant RBA. ”

So I installed Propel RBA reel in the cartridge, filling and tested. Not expect much, I’m surprised how frikkin fantastic taste, especially with my first weird construction! They smoant have excelled in their R & D of the whole package. Despite the large role of value, just use RBA now my skills have improved with each generation, I really liked RBA construction. It is much easier than many MTL RTA is mine.

conclusion
Well, if you’ve read this far (well done), you see me in love with this AIO device, especially with the incredible RBA. I arrived at the advantages and disadvantages soon and I will fight with the inconvenience!

It would be nice if they included the RBA, but, to be fair, for the price was an incredible deal and I appreciate all the love in the world, not to build its own coil that is understandable remove PVP RBA remains.

I have tried and are numerous teeth and AIO Smoat Pasitio too, but in their own league and it will be a tough act to follow. And others to follow, and more devices with options RBA or close, which is a positive development. “Fire and forget” pods still have their place and could see that the market is fragmented, but Pasito be the reference and if the new device is woke up late happier! Meanwhile, I am more than satisfied.

I’ll buy another if I lost or broke mine – I have “alternative” and that the RBA acquired 100% YES.

pros and cons
Pro
First sense of the market.
Watt variables.
construction quality.
Magnetic ‘Pod’.
coil is excellent values.
Easy to use.
Packaging and presentation is the best I’ve seen.
RBA excellent choice.
The battery life.
fast charging.
USB-C
adjustable airflow.
easy filling.
Style (subjective).
Pocket friendly.
longe use.
Tank 3 ml (2 ml TPD).
Value.
Cons … .. uh …….
The model of love or hate.
RBA are not included.
More than most.
DTL little too restrictive.
I do not know what CPR.
The box was too good to throw away.
I thought I would give

Anthony Vapes: Advken Manta RTA Review

Hi all, Anthony woozy back here with my Advken Manta RTA. Warning: This product was sent to me from elementvape.com

 

comments Disclaimer

I review the products for what they do not take into account where it comes from or who made it. The results of the test results for what is in my hands. Due to possible differences QC your experience may be different. I spent more time with the product and then most of the criticism and try to be thorough, making disassembly to check faulty design, test accuracy, and stress testing, which is usually done in the ‘care industry to try to “force” the failure diagnosis or potential failure point to give me an idea of ​​the life of the product. That said, there is no way to predict whether or device will last 6 months, 1 year, 5 years, etc. Each item is produced from cars to cell phones to computers pods may have arrived DOA or a small% failure rate. There is no way to predict or quantify it. That’s why there are guarantees and lemon laws. I can look at what I have in my hands for better or worse. Contrary to popular belief, there is no special review samples of top quality. Most of my personal time to get the commercial version, sometimes I get their initial version is usually worse than the final retail version.

 

Introduction:

Manta RDA is the last Advken. They are a company that has been around for a while, but with little fanfare. Most popular products, they can gorge mad hatter GDR and with a gap on the hinge for easy filling. Manta part double coil air flow RTA with a capacity of 4.5 ml with glass bubbles (or 3 ml of capacity with ordinary glass) and is available in 5 colors, black, SS, rainbow, blue, and gold.

 

Manufacturer Specifications

Staniless 24mm stainless construction

gold plated double bend Post and Central Bridge Section Section

Top Re-filling system

setting tri-water-holes system

510 wire and gold plated contact pin

CHUBBY standard glass tube parts and normal glass tubes

4.5 ml / 3 ml capacity According tube Choice

Coming up with a screwdriver and Confederate bag

Standard gift box package

Included in the box

1 Blanket 24mm RTA

Bubble extensions Cristal 1

1 roll screwdriver Dr.

Parts and O-rings

First impressions and features

When I came to this RTA I I was very impressed by the performance and quality of it. A gold was only an impressive finish to it. The thread and O-rings are very good. No O-ring damage or sticking to the glass dismount. air flow by using three separate holes instead of a large on each side. Ideal for people who want to lose air. It is a little tight, but and it can be difficult to adjust in the mod.

Deck Construction (photos above)

Let us now build a platform. It is rather the style and pace of the second holes after 2 bridge by mail, but with more metal in it. Each cable has the hole itself was always good and is easy to build one. Hexagonal use good quality accommodation which is my favorite. It also has some extra metal between coils with a hole. conditioned air flow is downwards with two relatively small holes in the bottom of each coil. platform is very easy to align your reel in the airflow, but do not have a lot of space in it. It is more appropriate to reduce the power of smaller construction. I found 3 mm max be fit there and 2.5 mm also works very well. Generally easy to build a platform made by a small construction

It is also easy to capillarity. This is a platform GTA style is really very low. No JFC and leak. It was pretty forgiving, but if you use a lot of cotton. Not too accelerator, but sufficient to fill every slot with a flush cotton tip at the bottom. You should be able to adjust its pincers easily between cotton and fill holes that are small enough. I found the coil 2.5 mm is not necessary to your potential customers thin at all. The son of 3mm want to roll clarify a bit.

success

Regarding performance, the use as a double coil RTA only as intended. I found three coil construction luxury through it in the range of 5 to 6 packs 3 mm and 2.5 mm ID. I also found 2 rounds of simple construction with 26 envelopes measuring instruments 8-9 Nichrome 1 mm ID 3 and 1 in the 2.5 mm ID. Overall, I think it works well with everyone to build. It is very flexible and does not need anything fancy to taste good, but I would stick with either 3 mm internal diameter of 2.5 mm in diameter or ID of the coil. There is plenty of room for a large building, it is best used in the range of 40-70 watts. It would not take much more than that. That said, I have a very good sense. This figure is higher than the average watts average TSR. I feel I’ve done the best construction for taste is luxurious 5 reel within 2.5 mm film DI TC 60 watts.

general impressions, details and extras

This is the bottom of the RTA and AFC airflow is smooth, but a little tight and cover. glass bubble, it is difficult to adjust when I was in the Ministry of Defense, but easy to adjust when mod. Full level is high where the lid is unscrewed and expose two holes filling large. hat has a textured design as well and is easy to grip and open the cover. It is easy to fill all kinds of bottles or juice simply poured. I used the 70/30, 80/20 and juice “VG max” on it without problem. 810 comes with a standard tumble blanket Ultem and wrote on it. It is very good and easy to disassemble, with a minimum of parts to it. All nice and soft yarn. Is the diameter of 24mm RTA therefore does not harm most mods. capacity of 4.5 ml is pretty good with a glass bubble for tanks that do not really drink juice.

Pro:

manufacturing quality

visible

Colour selection

standard tip 810

build a bridge and posts good quality screws

filling marquee design

above the average of the direction RTA mid watts

capacity 4.5 ml

Drawbacks:

It build a platform is limited to the size of the coil

AFC difficult to adjust when mod

conclusion

So with all that said, I recommend the RTA? I do not like or is not difficult, but will lean slightly toward him, but with a caveat was added to the average vapers watts. If you want to vape more than 70 watts it is not for you. If you want VAPE 40-70 watts and does not touch the juice and still get a good sense, it is a very good choice. Not going to do my best, but still good enough prey RTA. I’ll add to my list

You can buy here Manta 24mm TSR Advken | Staggered two Design Post in 32.95

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

For a good recommendation Google see my resume is here

This sheet is updated regularly so feel a marker.

Once again I want to thank you for sending me this elementvape.com for the purposes of this review

Also, if you missed some of my previous comments you can be found here Save Me

 

Geekvape aegis boost review

I received boost aegis Geekvape the purpose of this review.

 

Aegis Pod System Starter Kit:

 

– Gunmetal

– Black Space

– Aura shine

– Red Devil

– blue Almighty

 

Description and features:

 

– Dimensions: 106.8 x 39.2 x 27.7mm

– Material: zinc alloy, leather and silicone

– Battery capacity: 1500mAh

– Watt Output Range: 5-40W

– Output Voltage Range: 1.0-6.0V

– Speed ​​of firing: 0.08s

– Max power: 40W

– Coil: MESH

– Charge Micro USB port

– Load current: 5V / 1.5A

– Charging Methods: easy access charge

– Air flow: easy access to the air flow valve

– waterproof, shockproof and dustproof for a long life

– 2 / 3.7ml e-juice large capacity for continuous vaping experience

– Portable Size with a sleek, minimalist design

– Fully compatible with the Pod and RDTA

– With the two coils are designed for vaping experience MTL and DTL

– stain-resistant, corrosion resistant and tear resistant

– Some of protection to safeguard a secure and stable vaping

 

 

 

 

 

In the box:

 

– improve the Aegis

– 2 x coil

– USB cable

– Coil Tool

– User’s Guide

– slippery Pointe

– to promote and guarantee card

 

GeekVape Aegis Boost Vape Pod System. Since this device is the shadow of the series, the device is resistant to water, shock and dust, building quality of this device is very good as expected. It is a device with a screen and 5-40w work. Boost is available in 5 different colors are very good. In the package, you will receive two rollers, two ends at the tip of the hat drops and drips very well. The design of this device is really good in my opinion, it is small and easy to pocket. On one side of the device you can see engraved “Geekvape squonk mod kit” and the other side you can see engraved “Aegis”.

So let me start with the cartridge, the device is equipped with a cartridge and with this unit, you can only change the coil. At the top you can see the tip of the cartridge drops in the package, you will receive two drip tips are very good, the two extreme drops in my opinion, convenient to use. These devices are not comfortable with 510 drip tips to be a drawback for some, but in my opinion, the transmission of packet drops tips to stay comfortable and enjoyable. cartridge capacity is very good 3.7 ml, given the size of the device. In the cartridge, you can see the fill hole and fill the hole about anything in the filling hole can detail need to take to fill the cartridge. Cartridge is very good in places and this unit is not available with a magnet. From the back of the cartridges that you can see the part you need to push to release the cartridge. On one side you can see the slots of the cartridge and the airflow in this device can regulate the air flow is really good.

From the bottom of the cartridge, you can change the coil and in the package, get the tools you use to remove the coil. With this tool, you can easily remove the coil and then just press on the other. With this device receives two coils, one coil in the cartridge and the other on the package. Coils who will receive the cartridge is a driving force and power of the coil 0.4ohm 25-33w recommended for this coil. Spools that receive the coil box is a pulse with electrical resistance 0.6ohm Recommended ANDD 15-25W for this coil. As always, I say to start when a coil is used first, must be primed with a few drops of liquid E and thus prevent burns blow. This unit is compatible with the cartridge RDTA very good because you can create your own coil and save money, have not tried this RDTA cartridge, but is a very good choice.

From the top you can see the mod slots for cartridges and connections and as I said the cartridge stays perfectly in place.

This device has integrated the battery capacity and battery of 1500mAh which is really good considering the size of this unit. On one side of the device you can see the USB port you use to charge the battery.

On the front side of the mod, you can see the fire button, the screen and plus and minus buttons.

button fire a familiar form, it is clicky and worked well without problems. Plus and minus buttons as well and without any problems. The screen of this device is small and on the screen, we have all the information we need.

Trun on the device, you need to click 5 times on the fire button, you must do the same to turn it off. When you turn the power on screen, you can see:

 

– against Puff

– Coil Resistance

– The battery indicator

– W

 

 

To lock the plus and minus buttons you need to hold the plus and minus buttons together and you must do the same to unlock the keypad. When the keypad is locked, you can still use the fire button and you can VAPE. When you hold the fire button and the minus button you can reset the breath against.

A protective device:

 

– Over discharge

– Short Circuit Protection

– Output Current

– Protection against overload

 

 

How these devices work and my thoughts:

 

 

Thus, the shadow mod pod car is very well built, this camera is waterproof, dustproof and shockproof. build quality of this device is really good. good color choice, and in my opinion, the design of this model is really good, I really like this device looks much like another shadow mods. Aegis impulse comfortable to use and the device is small and light and therefore these devices are pocket friendly. With this device in the package you will receive two drip tips are great but it is not compatible with 510 drip tips that will con. Capacity carrtridge really good in my opinion, given the size of this unit. You can change the coil is very easy here and the great thing is that you can buy the cartridge RDTA. You can fill the cartridge without problems. cartridge holder firmly in place and you can easily remove the cartridge by pressing the back. Fire button and the plus and minus buttons either and so far all the buttons worked well. Built in battery has a capacity of 1500mAh which is good considering the size of this unit. I really like this device has a screen because you can see all the information we need.

The coil package works great, I really like 0.4ohm coil, I want to use to 26W and flavor with this coil is good enough. The device works well, there is nothing I can complain. In this device, we can regulate the air flow and excellent features airlfow you can adjust smoothly.

So I can say that the momentum can be the best auspices pod mod I have tried so far, it has everything that needs a mod pod have, is also convenient to use and the support cartridge RDTA and waterproof, dustproof and shockproof.

 

 

 

The inconvenients:

 

– It is compatible with 510 drip tips

 

 

 

 

 

pro:

 

– Good build quality

– Waterproof

– shock

– anti dust

– Choice of colors

– Two tips flowed in the package

– drip cap peak drop in package

– Two coils in the package

– Cartridge RDTA

– Capacity 3.7 ml

– the fire button and the plus and minus buttons work well

– Convenient to use

– Small and light

– Good taste

– Airflow adjustment

– No leakage

– Easy to fill

– 1500mAh

– screen

– Easy to change the coil

 

 

 

thank you Geekvape

You can buy it here: boost Aegis

Page FB: Geekvape

3 ways to help you get the best vape kit your needs

When you enter the world of e-cigarettes, the wide range of different styles and types of devices available can be somewhat overwhelming. This article aims to help you assess your needs to simplify the process of choosing the most suitable device for you. For this, we will check the different types of equipment and what type of vaper they are most suitable for, so you can confidently choose the right equipment.

Quick Links:intake rta,RPM80 Pro,Q-ULTRA Pod

A vape kit is the perfect way to start vaping, many regular vapers continue to buy different kits because they are increasingly curious about all aspects of vaping. In 2017, when choosing a starter kit, novice choices are indeed spoiled, but most include component types (although the specifications are different). The main components of the kit will vape the water tank, the battery (part “mod”) and the coil. These three elements and how they work together determine the type of e-cigarette experience you will have. This is a great way to try to know what e-cigarette you use.

Life of battery:

The battery can be one of the components least one value. It can have a huge impact on your experience e-cigarette, but even veteran e-cigarette give sometimes the changes that the correct battery can provide. Box Mods have more interior space. This means that a greater number of batteries can be included. Many commercial Mods Box may contain one or two batteries, while the largest Mod Box 18650 can contain up to four. Bigger battery power leads to higher power capacity, longer life of the device between charges, and better performance Box Mod.

Quick Links:SMOK Novo X Kit ,smok nfix kit

Atomizer:

Vape tanks vary in shape and size, but how to take care of them is basically the same. If you have regular e-cigarette inspection, please be sure to clean the e-cigarette cleaning tank with hot water or an ultrasonic cleaner every 2 or 3 days. This is not necessary, but can make your life easier. In the highly competitive cloud hunters, having a drop irrigation drop rebuildable atomizer (RDA) is absolutely necessary. RDA requires monitoring clouds to build its own coil, which can then be connected to the tank by means of a screwdriver or other similar tool. RDA is also called “dripper” because you must manually run the e liquid directly on the coil before every few puffs. This is not the best choice for everyday use, but it is very helpful to chase the clouds, because the resulting clouds are very large.

Reel Best:

Each kit will vape a coil. The coil or atomizer is essential. The coil is wound around the wick of the electronic cigarette device, and heated in the wet steam to transform the juice state. There are different coils of different specifications on the market. One of the main characteristics of the coil you will see is its “Ohm” rating. Each spray coil has a specification ohm. “Ohm” is a wire resistance measurement of electrical coil has an electrical resistance, which determines the amount of steam and flavor you get from the puff. Sub-ohm e-cigarettes use coils with a resistance less than 1 ohm to produce more cloud e-cigarette and a stronger taste.

If you want to blow big clouds, in-depth understanding of the coils Vape bring you great help. If you want to compete to become a cloud hunter, you must consider the following:

airflow Airflow-great is essential for large clouds. Make sure not to fill the spool with cotton, cotton will die otherwise.

Quick Links:Morph 219W kit ,RPM40 Kit, Smok MAG P3
gauge wire reduce wire gauge to the thicker wire surface evaporated juice is greater. Better 24 wire diameter wire is to track clouds of a wire diameter 30, son, but do have a low resistance, the more windings are required.
diameter inside a structure having an inner diameter of 2 mm does not split big clouds, you need at least 3 mm. The larger internal diameter allows contact over cotton thread and helps to evaporate more quickly vape juice.
Want coil positioning the coil is aligned with the recent

Smok comments RPM 2 POD Kit

Was an agreement to purchase cheap Smok kit RPM 2. integrated battery 2000mAh, power 80 W, Variable mode watts unprecedented juice 7 ml capacity, fast startup, and USB-C recharging coil mesh 2 option can be used to MTL DTL or spraying. Monodosis prism system is sold in gold, red, blue prism, Black Bright rainbow prism and the prism Far from varnish.

 

Pallas Mechanic Resin

Overview RPM 2
As the successor and Smok Smok RPM80 RPM40, Smok RPM 2 has a very similar appearance, but easier to carry, and has a higher start button and up / down buttons. In addition, the entire device is easier to use, and the size is suitable for hand or pocket. 2 RPM kit includes each module and filling the ink cartridge with replaceable coil. Available colors are prism, rainbow, bright Black, Blue Prism prism Laval.

Quick Links:TFV16 Mesh Coil ,TFV16 Dual Mesh Coil, TFV8 Pyrex Glass Tube

 

Augvape vape

In addition, Smok RPM 2 Uses powerful 2000mAh internal battery to provide more time to vape, vaping allowing all day without recharging is necessary. Moreover, the load port type C on the side of the second RPM adopts a secure and stable connection for the safe processing and fast loading. USB Interface Type C is the selection of the latest and most convenient because you can connect or down, and outstanding efficiency up to 100%. Integrated Protection lithium / ion can also prevent overloading, high current and short circuits, providing completely secure vaporizer experience. The best part is that RPM 2 transmission charge carriers, which means you can continue to evaporate when connected Pod Kit.

LOST VAPE

In Smok RPM control panel 2 you can see the big screen of 1.14 inches, and can use a / down navigation keys Ergonomic up. The menu is a vaporizer indicator data such as the current battery level, the current power, the output voltage, current resistance atomizer, a puff pastry and number. In addition, you can press +/- buttons simultaneously for more detailed information on the battery, as the balance of the withdrawal before recharging. Note that the rest of the suction volume is calculated based on the current configuration of power and within the limitations of the pods of the coils.

smok vape atomizer

Smok RPM 2 cloves and rollers
A perfect complement to the Mod is a pod with a powerful magnet to ensure that no matter how stirring RPM 2, do not move or sound. With e-liquid 7ml unprecedented capacity, each cartridge may contain 30% more than previous containers RPM, reducing the load on each day. In addition, each door RPM cigarette 2 is ergonomic and has a large oval aperture of 9.5 mm x 5.6 mm, with an air flow increasingly larger blowing. Liquid storage tanks are also translucent, which can be seen best current level e-liquid internal. To introduce other liquids in the case, remove the rubber plug on the side and your favorite vaporizer juice is poured into the port of appropriate size. After loading, it is important to wait 2 to 3 minutes to ensure that the coil is completely saturated cotton.

Quick Links:SCAR-18 Kit,SMOK SCAR-P3,Scar P5 kit

Smok RPM 2 has two new options coils are in the lung or mouth into the lungs of experience vape directly. DTL nozzle is 2 Mesh 0.16ohm RPM, which can generate a vapor thickness, has excellent flavor, and can run between 25 and 50 watts. optimal setting for this coil is 40 watts. Otherwise, you would like RPM mesh MTL 0.4ohm coil, which produces a mild throat and satisfy the taste. You can use this large coil e-liquid nicotine with a power of 25 watts.

Smok RPM 2 features and specifications
An important aspect widely Smok RPM 2 Pod system is that it can be released in the power range of 1 to 80 watts and respond to press the start button in 0.001 seconds, which is almost instantaneous. RPM 2 measures 28.5mm x 108.5mm x 31 mm and weighs only 132 grams. In addition, the charging system is working with a load current of 1.4 amps. For detailed specifications, please see the infographic below.

Quick Links:Morph 219W kit ,RPM40 Kit, Smok MAG P3

In the frame
A buying Smok RPM 2, will receive the RPM 2 pre-installed coil mesh 0.16ohm equipment pod, pod pre-installed with 0.4ohm coil C and manual cable type. Note that, in accordance with the regulations, the RPM version 2 of the EU to send a container 2 ml instead of 8 ml.

RPM80 Pro

Learn more below:

Smok RPM 2 Pod Kit

E-liquids GUIDE – Freebase Garam VS Nikotin Accessory

E-liquid (also called vape juice, eJuices, liquid nicotine) usually contains only the following four ingredients: vegetable glycerine (VG), propylene glycol (PG), flavors and nicotine.

EJuice type of nicotine play an important role in the Pallas Mechanical resin type device used. The type of equipment selected also affects the distribution of nicotine in the body.smok vape

I Freebase E-liquid? spraying Augvape

Most of the nicotine free base is extracted directly from plants snuff and nicotine extracted plant pure without other impurities or byproducts. nicotine free form can cause an imbalance of alkalinity, and as an increasing concentration of nicotine, the slot also affected. You can feel when the content of free nicotine is greater, 3 mg subtle drop shot and tolerable throat, while 6 mg increasingly difficult even to 12 mg. Manufacturers E-liquids tend to remain in the range of 0 to 6 mg, and seldom remain in the range of 12 mg or 18 mg of free eJuice extreme rigor and basic demographic characteristics of small (usually level). 0 mg e-liquid containing nicotine VG / PG pure agent.Pallas and flavoring resin Mechanic

Quick Links:TFV16 Mesh Coil ,TFV16 Dual Mesh Coil, TFV8 Pyrex Glass Tube

What the nicotine salt?

nicotine salt or nicotine salt is a slight modification of nicotine free base. The addition of benzoic acid to help balance the alkalinity of nicotine free base. Usually, this results in a much less severe, and despite the higher concentrations of nicotine, offering an experience atomizer spray Smok smooth. Dose of nicotine salts typically 20 mg to 59 mg. This is due to the composition of the nicotine salt and benzoic acid. A spray devices VAPE low power (such as the sheath system),  Augvape vape the slot decreases.LOST wound adjust VAPE

Now that you know what each type of nicotine, the characteristics and quality, we can find the right equipment for each type of nicotine.LOST VAPE

Ohmic or salt as sub-salt ohmic nicotine?

nicotine salts are typically used with lower power consumption and smaller equipment, but there are some exceptions. Some manufacturers of nicotine salt e-liquid to copy the formula ohms, called e-liquid is the “salt of the sub-ohmic.” It can be sure that it is possible to use a higher power devices with “nicotine salt sub-ohm” Mod kit or box that is expressed normally applicable 3 mg and 6 mg nicotine. The reason for the adoption of the salt form of nicotine stinging throat of a forum based on the conventional free is reduced, producing another throat and generally milder than 3 mg or 6 mg ordinary.

free and sub-ohm-liquid devices E

Freebase E-liquid is adapted to the sub-ohm or more atomizers equipment coupled to a box model, such as water tanks and SRP. Due to low concentrations of nicotine nicotine free base, it is best to use the sub-ohms equipment. The coils are larger, higher power and lower pressure than the sub-ohmic device allows evaporated free nicotine in the juice, thereby releasing small quantities so large amounts of water vapor. For users who enjoy acting and production of many clouds, it is the best choice. Despite the large amount of steam produced, nicotine concentration LOST VAPE is still very low. They can be loaded in the system Freebase eJuice Pod for more freedom, but many systems are not optimized for the Tuxedo tanks free base Pod eJuice, due to the lower resistance to nicotine free base may not evaporate completely the same capacity equipment sub-ohms.

Quick Links:SCAR-18 Kit,SMOK SCAR-P3,Scar P5 kit

nicotine salt and the sheath system

In addition, nicotine salts are useful for the armor system. The use of a less resistance smaller coil and output a higher power for a discrete steam cloud, thereby providing a better effect of nicotine salt. The inclusion of benzoic acid to help smooth delivery of nicotine salts and alkalinity balance to reduce the feeling of the throat. Not install the nicotine salt with high resistance to nicotine in its sub-ohms, due

Malla history and vaping

Mesh material is not exactly new to vaping industry. Initially introduced as a wicking material prior to the popularity of the cylinder laminated cotton network used to send e-liquid to the heating element of the storage container. More recently, however, the power supply in the vaping community awakening was found to be one of the main circuit. simply press the metal coil mesh disarm socket. But with the latest innovations we have a network of coils see big clouds of steam for the wider region and the lower resistor networks can provide. Turning to the electrical coil in the world can show a benefit with little or no work, so you can pick up used and what wecan do for you a coil deep in the net.

Quick Links:RPM160 VW Pod,Smok Mag Mod 225W

Features network coil

If built in the configuration of the plurality of drilling holes or woven wire coil electricity lost due to the various advantages of the best taste for low power consumption is higher. There are pros bog that comes with using nets, but not without drawbacks. Here are some factors that prebuilt using mesh coil will be affected:

 

rapid heating and taste better

coil power structure has a lower resistance, may now flow easily between the positive and negative terminals. This leads to a uniform and rapid heating heating nice mesh, to conserve battery power. This in turn provides greater surface area for evaporation occurs, which leads to a more dense with a variety of flavors vaping output, as more e-liquid evaporates traditional creature next round coil wire. Because heating and evaporation occurs at low power levels, the steam produced at lower temperatures, resulting in cooler temperatures and satisfying experience vape vape.

Quick Links:SMOK Novo X Kit ,smok nfix kit

economical

Because the coil power more often, they are also cheaper, through the use of low power allows the resistance to decrease. This saves battery power and power. However evaporated with increasing heating and evaporation, electric coils and liquid me at every stroke, so thinning faster than their favorite flavor. That’s the negative side is to share the taste of your favorite eJuice overlooked and that you are in love with something..LOST VAPE

Availability

One thing that users suffer network availability spool coil is clean Precast. Unlike conventional round wire coil, coil mesh can not be built only on the traditional coil building materials. This means that if the mesh coil is currently not in stock, you need to look for other sources of the coil or to wait for charging. fast to handle various types of wire turns always been a source of traditional voice coil wire round the benefits of being the location. This means that even if the configuration of the cable to the end of a preferred coil, can still be done with traditional wire.

 

installation Augvape vape

electric coil that is easy to install and replace, unlike the conventional circular coil of wire. With many different constructions of the RDA or RTA, electric coils have the same installation. Usually both ends of the deck to the type of fastening system attached build strength coil loaded against Cotton juice. No need for an envelope, inside diameter fine size or access point so that the network coil for beginners easy to install. You only need to correct spherical shape with full contact against the juice turn loaded cotton dense cloud of steam to pump taste.

 

We hope that this guide has become familiar with the benefits of pre-compiled mesh coils are offered by various brands such as Wotofo vape leader, Vandy evaporator and Smok. Find us Beginner’s Guide to be repaired at our website to see ElementVape.com, the heating element can be realized as new, providing a good alternative to the traditional round wire coil. Please share your experience with a net reel in the comments if you’ve done Swi